Resource Library

Copper for Roofing

Introduction to copper detailing including laying systems, ventilation, substrates and parapet gutters.

Download document

The Drinking Water Directive: ECI's Contribution

The European Copper Institute (ECI) strongly supports measures that help to improve the quality of water intended for human consumption. ECI therefore is in favour of EU-wide standards that help understanding and reduce sources of chemical and/or biological contamination in drinking water systems. This document outlines three main topics to be addressed in this context.

Download document

Effects Based Methods for metals under the Water Framework Directive

Effects Based Methods are a promising new tool, and are considered for use under the Water Framework Directive. Effects Based Methods are a holistic approach which could assess the risks of chemical substances more accurately. Substances are grouped by their mode of action, and specific methods are subsequently developed based on this mode of action to establish a trigger value. This allows for regulating substances with the same mode of action.

This report evaluates the use of 13 Effects Based Methods that might be considered for regulating metals under the Water Framework Directive. Each Effects Based Method was evaluated with respect to three criteria that are critical when considering such methods for regulatory use. These criteria include specificity, sensitivity (to metals and to other classes of toxicants), and the link to higher levels of biological organisation.

The evaluation concludes that that each of the available methods has at least one significant limitation. Therefore, Effects Based Methods are today not well suited for regulating metals under the Water Framework Directive. Additionally, since metals are easily and routinely measured, the added benefit of developing Effects Based Methods for metals is unclear. Instead, it is recommended to further focus on developing bioavailability models for metals mixtures. Such models would be a more practical and cost-effective tool to assess metals under the Water Framework Directive in a holistic way.

Download document

Pub 22 Copper for Busbars - Guidance for Design and Installation

First issued in 1936, in this new edition of our long-standing busbar design guide – Copper for Busbars – the calculation of current-carrying capacity has been greatly simplified by the provision of exact formulae for some common busbar configurations and graphical methods for others.

Other sections have been updated and modified to reflect current practice. 2014. 103 pp.

Download document

Technical Information on Materials Intended for Use with Food

This fact sheet provides technical information on the use of copper and its alloys for food contact materials, including an overview of the latest European legislation.

Download document

Will commercial grades of copper become hard (like steel) if they are cooled rapidly after heating?

No. Copper is not susceptible to precipitation hardening.

Is it possible to heat treat aluminium bronze CW307G (CA104) to improve its corrosion resistance?

Yes, this is covered in Def Stan 02-833. For extruded rods and sections of size 40mm and below, an anneal at 740°C plus or minus 20° followed by air cooling is carried out. This mandatory heat treatment is to eliminate phases which are likely to give rise to selective corrosion in sea water.

With respect to the MOD Defence Standard 02-879 Part 2 Forgings, what do the terms Class 1, Class 2, Class 3 and Class 4 mean?

 

  • Class 1 is a forging whose failure would lead to uncontrollable flooding, the total immobilisation of the vessel or serious harm to personnel.(e.g. First Level systems in submarines).
  • Class 2 is a forging whose failure would lead to severe but controllable flooding, the serious disruption of weapon systems, main propulsion machinery, or its attendant auxillaries, including generators
  • Class 3 is a forging whose failure does not constitute an immediate, significant hazard.
  • Class 4 is a forging which is used for forging stock only.